Hearthstead Mosaic Thin Stone

Hearthstead Mosaic is a traditional weathered fieldstone with subtle variations of tans, grays, and browns. This affordable offering is priced competitively against manufactured veneers – allowing all the benefits and cost savings with the incomparable beauty and timeless appeal of a natural product.

Hearthstead Mosaic can be installed above or below grade and usually does not requires footers or additional support. Check with local building codes before installing material. This durable material is suitable for interior and exterior use.

Uses

Interior and exterior adhered veneer, including house fronts, commercial facades, foundations, columns, outdoor kitchens, backsplashes, shower walls, chimneys, fireplaces, and surrounds.

Color Range

Tan, Brown, Rust, Buff, Gray

Finish

Weathered Face, Sawn Back

Dimensions

Piece size varies average: Lengths – 6” to 24”
Heights – 6” to 14”
Thickness – ¾” to 1¼”
Packaging may include less than 5% long strips of 3” to 4” heights and lengths of a minimum of 9.

Weight

~15lbs/SF

Packaging:

Flats available in 100SF boxes.
Corners available in 65LF boxes.
Coverage based on ½” mortar joint.

SPEC SHEET

Hearthstead Mosaic Thin Stone

Hearthstead Ledge

Hearthstead Ledge is a traditional weathered fieldstone with subtle variations of tans, grays, and browns. This affordable offering is priced competitively against manufactured veneers – allowing all the benefits and cost savings with the incomparable beauty and timeless appeal of a natural product.

Hearthstead Ledge can be installed above or below grade and usually does not requires footers or additional support. Check with local building codes before installing material. This durable material is suitable for interior and exterior use.

Uses

Interior and exterior adhered veneer, including house fronts, commercial facades, foundations, columns, outdoor kitchens, backsplashes, shower walls, chimneys, fireplaces, and surrounds.

Color Range

Tan, Brown, Rust, Buff, Gray

Finish

Weathered Face, Sawn Top, Bottom, and Back

Dimensions

Piece size varies, roughly square/rectangle, with average:
Lengths – 4” to 24”
Heights – 2”, 3”, & 4” (Uniform)
Thickness – ¾” to 1½”

Weight

~15lbs/SF

Packaging:

Flats available in 100SF boxes.
Corners available in 65LF boxes.

SPEC SHEET

Hearthstead Ledge Thin Stone

Ancient Villa Ledgestone - Chianti

A blend of regular and irregular rubble stones epitomizes rustic charm.

Cultured Stone veneer offers superior durability and long life-cycle with a 50-year limited warranty and a 63-point circle of quality inspection process ensures product consistency from box to box. All Cultured Stone products contain 54% pre-consumer recycled content and are GREENGUARD certified and NAHB Green Approved.

Uses

Interior and exterior adhered veneer, including house fronts, commercial facades, foundations, columns, backsplashes, chimneys, fireplaces, and surrounds.

Color Range

Brown, Gray, Buff, Purple

Finish

Split Face

Dimensions

Height – 2″ to 12″
Length – 5″ to 16″
Thickness – 1.5″ to 1.25″
Corner Returns – 4″ to 12″

Packaging:

Flats – 11.25 SF, 124SF
Corners -8LF, 64LF
Coverage based on a .5″ mortar joint.

Stony Point Williams Ledge

Stony Point Williams Ledge offers a linear, contemporary look with a rich palette of cream, gold, gray, chocolate brown, tan, buff, white and hints of burgundy. It is crafted from natural fieldstone with a blend of our natural and chiseled faces cut to bring out the optimum color and texture of the original stone. The physical appearance of the stone offers a rich natural, weathered look that is perfect for rustic, country, and casual settings as well as designs that feature a more modern aesthetic. The aesthetic of the finished stonework will vary depending on the setting style used. A dry-stack look, like the one featured above, will require the mason to heavily work and shape the stone to create a tight fit. Stony Point® Williams Ledge also looks stunning when set with exposed, visible joints and will require less “tooling” of the stone from the mason.

This locally sourced material may qualify as a LEED product for the Maryland, Virginia, and North Carolina markets.

Uses

Interior and exterior adhered veneer, including house fronts, commercial facades, foundations, columns, backsplashes, shower walls, chimneys, fireplaces and surrounds, hearths, exterior and interior walls, outdoor kitchens, and fireplaces.

Color Range

Cream, Gold, Gray, Burgundy, Chocolate Brown, Tan, Buff, White

Finish

Split and Natural Faces

Dimensions

Piece size varies average:
Length – 6″ to 16″
Heights – 5″ to 12″
Thickness – .75″ to 1.5″

Weight

~14lbs/SF based on 1.5″ thickness

Packaging:

Flats available in 20SF, 100SF, and 200SF boxes.
Corners available in 20LF and 100LF boxes.
Coverage based on .5″ mortar joint.
Allow for 20% waste when using a dry-stack application.

SPEC SHEET

Stony Point Williams Ledge Thin Stone

Stony Point Natural Ledge

Stony Point Natural Ledge offers a linear, contemporary look with a rich palette of buff, chocolate brown,gray and hints of burgundy. It is crafted from natural fieldstone and is cut to bring out the optimum color and texture of the original stone. The physical appearance of the stone offers a rich natural, weathered look that is perfect for rustic, country, and casual settings as well as designs that feature a more modern aesthetic. The aesthetic of the finished stonework will vary depending on the setting style used. A dry-stack look, like the one featured above, will require the mason to heavily work and shape the stone to create a tight fit. Stony Point® Natural Ledge also looks stunning when set with exposed, visible joints and will require less “tooling” of the stone from he mason.

This locally sourced material may qualify as a LEED product for the Maryland, Virginia, and North Carolina markets.

Uses

Interior and exterior adhered veneer, including house fronts, commercial facades, foundations, columns, outdoor kitchens, backsplashes, shower walls, chimneys, fireplaces, and surrounds.

Color Range

Buff, Chocolate Brown, Tan, Burgundy, Gray

Finish

Natural Weathered Face

Dimensions

Piece size varies average:
Length – 3″ to 16″
Heights – 1.5″ to 5″
Thickness – .75″ to 1.5″

Weight

~14lbs/SF based on 1.5″ thickness

Packaging:

Flats available in 20SF, 100SF, and 200SF boxes.
Corners available in 20LF and 100LF boxes.
Coverage based on .5″ mortar joint.
Allow for 20% waste when using a dry-stack application.

SPEC SHEET

Ston yPoint Natural Ledge


Stony Point Natural Ledge
Stony Point Natural Ledge
Stony Point Mosaic

Stony Point Mosaic offers the same beauty and solid finished look as the building stone, but with the appeal of efficient and lightweight installation. It is crafted from natural fieldstone and is cut to bring out the optimum color and texture of the original stone, unveiling hues of warm tan, rich brown, shades of gray and hints of burgundy. The physical appearance of the stone offers a rich natural, weathered look that is perfect for rustic lodges and cabins, cottages and casual settings.

This locally sourced material may qualify as a LEED product for the Maryland, Virginia, and North Carolina markets.

Stony Point Mosaic can be installed below grade and usually requires no footers or additional support. Check with local building codes before installing material. it is an easy stone to work with, is absorbent and lightweight, and adheres well.

Uses

Interior and exterior adhered veneer, including house fronts, commercial facades, foundations, columns, backsplashes, shower walls, chimneys, fireplaces and surrounds, hearths, exterior and interior walls, outdoor kitchens, and fireplaces.

Color Range

Buff, Chocolate Brown, Tan, Burgundy, Gray

Finish

Natural Weathered Face

Dimensions

Piece size varies average:
Length – 6″ to 15″
Heights – 6″ to 13″
Thickness – .75″ to 1.5″

Weight

~14lbs/SF based on 1.5″ thickness

Packaging:

Flats available in 20SF, 100SF, and 200SF boxes.
Corners available in 20LF and 100LF boxes.
Coverage based on .5″ mortar joint.
Allow for 20% waste when using a dry-stack application.

SPEC SHEET

Stony Point Mosaic Thin Stone

Stony Point Dressed Ledge

Stony Point Dressed Ledge offers a linear, contemporary look with a rich palette of buff, chocolate brown, gray and hints of burgundy. It is crafted from natural fieldstone and is cut to bring out the optimum color and texture of the original stone. The physical appearance of the stone offers a rich natural, weathered look that is versatile and perfect for country, and casual settings as well as designs that feature a more modern and contemporary aesthetics.

The aesthetic of the finished stonework will vary depending on the setting style used. A dry-stack look, like the one featured above, will require a mason to heavily work and shape the stone to create a tight fit. Stony Point Dressed Ledge also looks stunning when set with exposed, visible joints and will require less “tooling” of the stone from the mason.

This locally sourced material may qualify as a LEED product for the Maryland, Virginia, and North Carolina markets. Stony Point can be installed below grade and usually requires no footers or additional support. Check with local building codes before installing material.

Uses

Interior and exterior adhered veneer, including house fronts, commercial facades, foundations, columns, outdoor kitchens, backsplashes, shower walls, chimneys, fireplaces, and surrounds.

Color Range

Buff, Chocolate Brown, Tan, Burgundy, Gray

Finish

Natural weathered face with sawn top, bottom, and back.

Dimensions

Piece size varies average:
Length – 4″ to 12″
Heights – 1″ to 1.5″
Thickness – .75″ to 1.5″

Weight

~14lbs/SF based on 1.5″ thickness

Packaging:

Flats available in 20SF, 100SF, and 200SF boxes.
Corners available in 20LF and 100LF boxes.
Coverage based on .5″ mortar joint.

SPEC SHEET

Stony Point Dressed Ledge

Stony Point Natural Ashlar

Stony Point Natural Ashlar offers a contemporary look with a rich palette of buff, chocolate brown, gray, tan, and hints of burgundy. It is crafted from natural fieldstone and is cut to bring out the optimum color and texture of the original stone. The physical appearance of the stone offers a rich natural, weathered look that is perfect for rustic, country, and casual settings as well as designs that feature a more modern aesthetic.

The aesthetic of the finished stonework will vary depending on the setting style used. A dry-stack look, like the one featured above, will require the mason to heavily work and shape the stone to create a tight fit. Stony Point Ashlar Natural also looks stunning when set with exposed, visible joints.

This locally sourced material may qualify as a LEED product for the Maryland, Virginia, and North
Carolina markets.

Uses

Interior and exterior adhered veneer, including house fronts, commercial facades, foundations, columns, outdoor kitchens, backsplashes, shower walls, chimneys, fireplaces, and surrounds.

Color Range

Buff, Chocolate Brown, Tan, Burgundy, Gray

Finish

Natural weathered face with chiseled edges

Dimensions

Piece size varies average:
Length – 6″ to 14″
Heights – 5″ to 12″
Thickness – .75″ to 1.5″

Weight

~14lbs/SF based on 1.5″ thickness

Packaging:

Flats available in 20SF, 100SF, and 200SF boxes.
Corners available in 20LF and 100LF boxes.
Coverage based on .5″ mortar joint.
Allow for 20% waste when using a dry-stack application.

SPEC SHEET

Stony Point Ashlar Natural

Stony Point Ashlar Blend Thin Stone

Stony Point Ashlar Blend offers a linear, contemporary look with a rich palette of cream, gold, gray, chocolate brown, tan, buff, white and hints of burgundy. It is crafted from natural fieldstone with a blend of our natural and chiseled faces cut to bring out the optimum color and texture of the original stone. The physical appearance of the stone offers a combination of rich natural, weathered and chiseled faces to create a look that is perfect for rustic, county, and casual settings as well as designs that feature a more modern aesthetic. The aesthetic of the finished stonework will vary depending on the setting style used. A dry-stack look, like the one featured above, will require the mason to heavily work and shape the stone to create a tight fit. Stony Point Ashlar Blend also looks stunning when set with exposed, visible joints and will require less “tooling” of the stone from the mason.

This locally sourced material may qualify as a LEED product for the Maryland, Virginia, and North Carolina markets.

Uses

Interior and exterior adhered veneer, including house fronts, commercial facades, foundations, columns, outdoor kitchens, backsplashes, shower walls, chimneys, fireplaces, and surrounds.

Color Range

Cream, Gold, Gray, Burgundy, Chocolate Brown, Tan, Buff, White

Finish

Chiseled and natural Faces

Dimensions

Piece size varies average:
Length – 6″ to 14″
Heights – 5″ to 12″
Thickness – .75″ to 1.5″

Weight

~14lbs/SF based on 1.5″ thickness

Packaging:

Flats available in 20SF, 100SF, and 200SF boxes.
Corners available in 20LF and 100LF boxes.
Coverage based on .5″ mortar joint.
Allow for 20% waste when using a dry-stack application.

SPEC SHEET

Stony Point Ashlar Blend